Stu40
New Member
Hi all, first time posting. Hoping someone can answer this simple question. I installed my first solar set up and don't think I missed anything but something is wrong and I don't know what to test, look for, read about (etc). I have two HQST 100W monocrystalline panels powering a Epever tracer6420an. That is feeding two WEIEZ 1200Ah LiFePo batteries. I finished the project, moved the unit into the sun, flipped the disconnect and had 21.4-22.4 volts at the Tracer. At this time I expected the Tracer to light up and allow me to go through the settings, but nothing happened. The dry contact switch is in the on position and the ground to the frame of the Tracer is good. What am I missing? Thanks for any help -Stu