Feedtap + Feedertap Breaker Recommendations

[seatosummit]

Hi there!

I am planning to upgrade my electrical panel from a 100A service to 200A main service.

Entertaining the idea of adding solar + battery storage while doing so.

I have been referencing the diagram in the EG4 18kPV manual for whole home backup.

I am familiar with feeder taps and have used them on other projects. What I am less familiar with is what specific protection equipment would best serve the purpose of the "200A Feeder Tap Breaker" and "PV Interactive System 2-pole Fused Disconnect". I could purchase these components standalone and mount them in dedicated enclosures, but I am wondering if others have experience with an enclosure that might combining these two components, perhaps also negating the need for a Polaris?

Attaching the diagram in question. Its on page 34 of the manual for the 18kPV.

Thanks for any and all help.

Austin

 

[prometheanfire]

well, the feeder tap and main service breaker have a arrow pointing to them with a recommended model QOM22225NRB.

If it helps, here is my part list and approximate location

Installed outside

Main Breaker - https://www.amazon.com/SCHNEIDER-ELECTRIC-Enclosure-225-Amp-QOM22225NRB/dp/B00CONL43I

feeder tap? - https://www.stateelectric.com/products/ilsco-ipc-4-0-6/

15k disconnect - https://www.lowes.com/pd/Siemens-200-Amp-2-Pole-Fusible-General-Safety-Switch-Disconnect/5013278421

emergency shutoff button - (find one)

Installed inside

feeder tap breaker - https://www.amazon.com/SCHNEIDER-ELECTRIC-Enclosure-225-Amp-QOM22225NRB/dp/B00CONL43I

double throw switch - https://www.homedepot.com/p/Siemens...on-Fusible-Safety-Switch-DTGNF224NR/205874580

PV array disconnect - (6 strings into the 3 mppts, find one or some)

 

[philatio]

well, the feeder tap and main service breaker have a arrow pointing to them with a recommended model QOM22225NRB.

If it helps, here is my part list and approximate location

Installed outside

Main Breaker - https://www.amazon.com/SCHNEIDER-ELECTRIC-Enclosure-225-Amp-QOM22225NRB/dp/B00CONL43I

feeder tap? - https://www.stateelectric.com/products/ilsco-ipc-4-0-6/

15k disconnect - https://www.lowes.com/pd/Siemens-200-Amp-2-Pole-Fusible-General-Safety-Switch-Disconnect/5013278421

emergency shutoff button - (find one)

Installed inside

feeder tap breaker - https://www.amazon.com/SCHNEIDER-ELECTRIC-Enclosure-225-Amp-QOM22225NRB/dp/B00CONL43I

double throw switch - https://www.homedepot.com/p/Siemens...on-Fusible-Safety-Switch-DTGNF224NR/205874580

PV array disconnect - (6 strings into the 3 mppts, find one or some)

Thanks for the parts list. What breaker did you use for the the feeder tap and main service enclosures?