Hey, that's my first post, so yay!! I'm from Miami and got a 6KW PV, 10KWh LiFePo battery bank and the now useless 6kW Growatt. All worked fine since December '20.
My Growatt 6000T restarted for no apparent reason ones or twice a week. Growatt told me to upgrade to latest fw TMS320F28035_GW510.04_202105310957.bin. I did so and now all I get is error 51 after turning the inverter on. There is no load at all so the message is not fitting the situation. Technical support just told me to lower the load
Less than 0 is a no go!
I tried all what came to mind. Re-flash, PV on/off, AC on/off, small load/no load, leaving it off for 24 h, make a hand stand, check it without glasses (blurry) but nothing helped.
Did anybody have the same problem and a solution for this? I attached some screenshots from PVKeeper which may help to find the issue.
Any hep much appreciated!
My Growatt 6000T restarted for no apparent reason ones or twice a week. Growatt told me to upgrade to latest fw TMS320F28035_GW510.04_202105310957.bin. I did so and now all I get is error 51 after turning the inverter on. There is no load at all so the message is not fitting the situation. Technical support just told me to lower the load
I tried all what came to mind. Re-flash, PV on/off, AC on/off, small load/no load, leaving it off for 24 h, make a hand stand, check it without glasses (blurry) but nothing helped.
Did anybody have the same problem and a solution for this? I attached some screenshots from PVKeeper which may help to find the issue.
Any hep much appreciated!