Growatt SPF 5000 ES parallel confection

[terkazarian]

Hello

I've got 2 Growatt SPF 5000 ES, i want to connect them to a parallel mode, single phase output.

The question is, can i feed in each of the units with different phase from the grid, or they should be feed in with the same phase of the grid?
One phase will not be enough to me.

if not possible to use 2 different phases, is it possible to configure the 2 units to work with 2 phase system also for the output (instead of 3)?

Thanks
Arthur

 

[kirkdis]

1 phase parallel or upgrade to 3 inverters for a three phase setup
For all n between the growatts are not prepared.

 

[sollarPASS]

Normal setup - Each growatt needs his own phase
Parallel Setup - all parallel Growatts need to have the same phase

You can use the growatts to just provide load to one phase lets say when you have a garage or any load that you want to connect only thru the growatts.

But under no circumstances you can use 2 growatts parallel communication connected with different phases (by the way that wouldnt make sense)

If you can describe your setup and what you want to do than you may get an better answer. Because otherwise we would need to guess what you wanna do.