Hi everyone,
I woke up this morning and found that one of the 2 inverter's data logger is blinking green while the other one is blinking blue. Please also note that nothing has been changed in terms of configurations.
To find the root cause of the issues, I have done the following steps:
It is very confusing because one data logger is working fine while the other is blinking green.
Is there a problem with Growatt's server?
I woke up this morning and found that one of the 2 inverter's data logger is blinking green while the other one is blinking blue. Please also note that nothing has been changed in terms of configurations.
To find the root cause of the issues, I have done the following steps:
- Removed the logger from the mobile app (Shinephone)
- Reset the data logger but could not connect using the standard mode while noting that the first time it was installed I used the standard mode.
- Tried the hotspot mode after clicking on the "key" button with a short press and was able to connect to it but the light is still blinking green.
- I Tried also resetting my internet router but this didn't work as well.
It is very confusing because one data logger is working fine while the other is blinking green.
Is there a problem with Growatt's server?