I just built out my "Mobile Power Station" to deliver to a remote off-grid RV campsite. I have the (1) EG4 Powerpro battery conected by bus bars to two inverters the EG4 3000EHV-48 and EG4 6000XP. The EHV is just for backup and to allow 120V charging from a small suitcase generator in rare circumstances. The day-to-day setup is for the XP to work with the Powerpro and Solar panels to power the RV and charge the Hunting cart.
Well I finally got everything hooked up for a test run, and the XP refuses to come on. battery breaker (at XP) is on, unit is off, restarted the Powerpro battery first, then tried to turn on the XP - nothing. Gonna call Signature Solar tomorrow, but the thought that I have a dud inverter makes me worry about EG4...?
Just in case someone asks, the EHV is off at this point. but that does raise another concern:
-IF I have both inverters attached to the Powerpro battery (XP will use Batt Comm), will they interfere with each other? (EHV will be set to AGM - no BMS intelligence)
Well I finally got everything hooked up for a test run, and the XP refuses to come on. battery breaker (at XP) is on, unit is off, restarted the Powerpro battery first, then tried to turn on the XP - nothing. Gonna call Signature Solar tomorrow, but the thought that I have a dud inverter makes me worry about EG4...?
Just in case someone asks, the EHV is off at this point. but that does raise another concern:
-IF I have both inverters attached to the Powerpro battery (XP will use Batt Comm), will they interfere with each other? (EHV will be set to AGM - no BMS intelligence)