marcfest
New Member
- Joined
- Mar 18, 2022
- Messages
- 77
I've got ten solar panels with the specs shown below and a 250V / 100A Victron charge controller.
What's the best way to wire the panels? I was going to connect them all in series but I suppose that would exceed the 250V limit of the controller.
Thank you for your help.
Marc
Charge controler:
Panels:
PANEL SPECS
Watts (STC) 345W
Max Power Voltage (VMPP) 33.37 V
Max Power Current (IMPP) 10.34 A
Open Circuit Voltage (VOC) 41.0 V
Short Circuit Current (ISC) 10.92 A
Max System Voltage (UL) DC 1000 V
What's the best way to wire the panels? I was going to connect them all in series but I suppose that would exceed the 250V limit of the controller.
Thank you for your help.
Marc
Charge controler:
Panels:
Mission Solar 345 Watt All Black Mono Solar Panel - 40mm Frame - MSE345SX5T
Mission Solar 345 Watt All Black Mono Solar Panel - 40mm Frame - MSE345SX5T EcoDirect.com sells Mission Solar Panels at the lowest cost. Order Online or Call Us! 888-899-3509
www.ecodirect.com
PANEL SPECS
Watts (STC) 345W
Max Power Voltage (VMPP) 33.37 V
Max Power Current (IMPP) 10.34 A
Open Circuit Voltage (VOC) 41.0 V
Short Circuit Current (ISC) 10.92 A
Max System Voltage (UL) DC 1000 V