subarudrew82
New Member
- Joined
- Sep 11, 2020
- Messages
- 4
I have a question about this inverter. With the "grid-tie (feedback to utility grid)" turned off will the inverter still work as a local grid (house grid) assist. ie. will it still feed power(or better said supplement power) to the load even with utility power present? Or is it only an off-grid inverter when not using the grid-tie feature.
Hope that is correct way to ask that question.
Thank you
PS An example of what i mean: If I have the inverter priority in Solar->Battery->Utility order and the grid-tie feature off and I have a 5000w load. Would if produce 2400w from solar/battery (assuming solar array would supply enough for the inverter to max) would it continue to supply 2400w to the load and the 2600w remaining needed from utility power to produce the 5000w needed for the load. Or would the inverter fault (or shutdown) because it could supply the 5000w from the inverter output?
Hope that is correct way to ask that question.
Thank you
PS An example of what i mean: If I have the inverter priority in Solar->Battery->Utility order and the grid-tie feature off and I have a 5000w load. Would if produce 2400w from solar/battery (assuming solar array would supply enough for the inverter to max) would it continue to supply 2400w to the load and the 2600w remaining needed from utility power to produce the 5000w needed for the load. Or would the inverter fault (or shutdown) because it could supply the 5000w from the inverter output?