I bought JK-B2A24S20P and started testing it with 16 battery cells (3.2V 280Ah each ).
Parameters are set - please see pictures.
Setting works for only small charging current upto about 2 Amps. When rising to about 9Amps, the charging stops and JK BMS reports Cell Over Voltage Protection error.
How should I set JK BMS so that it will work with current higher than 2 Amps?
My JK BMS setting is here
Thank you
Parameters are set - please see pictures.
Setting works for only small charging current upto about 2 Amps. When rising to about 9Amps, the charging stops and JK BMS reports Cell Over Voltage Protection error.
How should I set JK BMS so that it will work with current higher than 2 Amps?
My JK BMS setting is here
Thank you