I have several JK BMS B1A8S20P, the silver looking open cased ones, not the earlier black enclosed versions. I’d like to add a power button (I have no screen). I’ve ordered my own switches (non-latching) and some suitable connectors, but am struggling to figure out how to actually make the switch work.
Bridging pins 1-2 of the display connector will turn the BMS off, but I can’t figure out how to get it to come on again with the switch. I read an old thread that mentioned a 10k resistor but adding this didn’t do anything.
Can anyone shed any light on this for me?
Bridging pins 1-2 of the display connector will turn the BMS off, but I can’t figure out how to get it to come on again with the switch. I read an old thread that mentioned a 10k resistor but adding this didn’t do anything.
Can anyone shed any light on this for me?