JKBM INVEWRTER BMS

[Nami]

HEY
This is NAMI
We need some help.
Recently, when adapting to VICTRON, our ESS BMS has experienced some delays in internal voltage and reading parameters.
Can anyone provide the latest VICTRON protocol?
We need to update the latest firmware flash program as soon as possible to better adapt to VICTRON.
So that everyone can upgrade to a new ESS BMS through a computer program.
To provide the correct friend, we are willing to provide a set of products of any model for free as a thank you.
Thank you very much for your support for JKBMS.
Thank you for your efforts in creating a cleaner energy society
Best Regards

 

[juf]

hi,

maby helpfull this

http://www.rec-bms.com/datasheet/UserManual_REC_Victron_BMS.pdf

https://www.victronenergy.com/upload/documents/VE.Can-registers-public.pdf

https://community.victronenergy.com/storage/attachments/21873-simp-bms-setup-manual-v025.pdf

 

[Nami]

hi,

maby helpfull this

http://www.rec-bms.com/datasheet/UserManual_REC_Victron_BMS.pdf

https://www.victronenergy.com/upload/documents/VE.Can-registers-public.pdf

https://community.victronenergy.com/storage/attachments/21873-simp-bms-setup-manual-v025.pdf

thanks we will check it
have a nice day

 

[juf]

By the way cah you send me the actual FW for this new BMS?
Have the PB2A16S20P version.
thx

 

[Nami]

We are making the final repairs to VICTRON's protocol,
It should be sent to you within 48 hours. Thank you

 

[juf]

Hi Nami,
is there any news?
regards

 

[cali-clim]

look new firmware 14.08 is ok for 200a

 

[mb84]

Hello, is the firmware only for the 200a model or also for others.
I have a PB2A16S15P and a PB1A16S10P. Do you have new firmware there too?

 

[cali-clim]

hello no is ok for 200a

 

[Steve_S]

@Nami the JKBMS representative from HankZor should provide a proper update on the hardware, firmware, software.
Hopefully a response will follow soon.

 

[cali-clim]

It was yesterday that I was provided with an update for me!!! that on a 200a 2a that's why I don't have the others but it's been working since yesterday it recognizes the bms in //