Li-ion vs LiFePO4 BMS

[Solar baby]

Hi,

I have a LiIon/Po BMS listed at 3.7 nominal from Battery Hookup. I was wondering if the BMS would be able to be used on a LiFePO4 battery pack if the software parameters were changed. I'm guessing no but I wanted to ask before I bought anything.

Link to BMS: https://batteryhookup.com/collectio...-bms-w-low-temp-cutoff?variant=36287974604962

Thanks

 

[Bud Martin]

Info form that page shows what you need to set the setting to for the batteries you want to use it for:
Lithium ion and polymer settings
Overcharge voltage per cell: 4.2
Overdischarge voltage per cell: 2.8
Discharge Continuous Amps: 100
10 second Discharge Burst: 200a
Charge Continuous Amps: 60a
Balancing Current: 60mA
Low temp cutoff: 32° F (0° C)
High temp cutoff: 167° F (75° C)
--------------------

Lithium Iron Phosphate (Lifepo4) settings
Overcharge voltage per cell: 3.65
Overdischarge voltage per cell: 2.5
Discharge Continuous Amps: 100
10 second Discharge Burst: 200a
Charge Continuous Amps: 60a
Balancing Current: 60mA
Low temp cutoff: 32° F (0° C)
High temp cutoff: 167° F (75° C)

 

[snoobler]

On that page, during the purchase process, you have the select the # of cells and the chemistry. I would not conclude that they are able to be changed.

 

[Solar baby]

On that page, during the purchase process, you have the select the # of cells and the chemistry. I would not conclude that they are able to be changed.

I assumed as much, thank you!