Building a battery bank with LiFePO4. 24 volt. Presently have six 12 volt 100ah. Planning on a few more eventually. (Maximum 12)
Will be connected to bus bars. 1/0 cables on all batteries. 2/0 going from batteries to inverter.
This line is fused with class T fuse 200 amp.
Should each battery pair be fused, or would it be helpful, where they connect to bus bars?
If so which type of fuse? Looking at MRBF terminal type, MEGA, ANL?
Cost is a consideration (but not at the expense of safety or reliability).
Also what would the fuse rating be?
Using 2000 watt inverter.
Will be connected to bus bars. 1/0 cables on all batteries. 2/0 going from batteries to inverter.
This line is fused with class T fuse 200 amp.
Should each battery pair be fused, or would it be helpful, where they connect to bus bars?
If so which type of fuse? Looking at MRBF terminal type, MEGA, ANL?
Cost is a consideration (but not at the expense of safety or reliability).
Also what would the fuse rating be?
Using 2000 watt inverter.