Johno1066
Solar Enthusiast
Thanks for your information. I just checked the BMS software and it does give the SOH and the number of cycles but I seem to recall that the batteries will be needed to come off the busbars to be checked and that the inverters need to be shut down. So if the inverters are shut down and also the PV input can you check each of the six batteries without disconnecting each from the busbars if you remove the comunication cables. Do you have to change the dip switches on the battery being checked to 0 or do you just put in the dip switch address into the software start address.
A little help from the forum could possibly prevent me from blundering around for hours trying to find the correct method so thanks for the help.
A little help from the forum could possibly prevent me from blundering around for hours trying to find the correct method so thanks for the help.