Make a long story short, a friend ordered an Anker F3800 power station. Its basically an AIO on wheels with a 48v 3.8KWH LFP battery.
The strange part is, the SCC is very limited. It has two levels of input and two separate inputs.
First level is 11v-30v 10amps
Second level is 32v-60v 25amps
I figured if he could get a panel in the 50v range and run 2-3 in parallel for each input, it would get the most without pushing the 60v limit.
I'm trying to find a panel that would work, prefer not a bifacial. Anyone know of anything close? So far I have only found about 41v at peak output.
The strange part is, the SCC is very limited. It has two levels of input and two separate inputs.
First level is 11v-30v 10amps
Second level is 32v-60v 25amps
I figured if he could get a panel in the 50v range and run 2-3 in parallel for each input, it would get the most without pushing the 60v limit.
I'm trying to find a panel that would work, prefer not a bifacial. Anyone know of anything close? So far I have only found about 41v at peak output.