I will be installing the MPP HYBRID LV2424 in a few weeks. It will be in a small 21' 30 amp Travel Trailer. We plan on boondocking a lot with it but as we also full time we will be plugged into shore power from time to time. We also will have a 2500 watt genny.
Our plan is for the MPP to power everything other than the A/C. I was going to just run the Shore power through the MPP and back to the fuse panel. However after reading someone else's post this probably won't work. They said the MPP LV2424 actually throttles the 30amp power to the 2400 watts. I need to be able to have the generator or shore power plugged in running the A/C while the MPP LV2424 powers the coffee pot (700 watts) and air fryer (1450 watts).
I'm hoping there is an easy answer like pull the A/C breaker off the input to the MPP But I have no idea how to do that. In my current rig we only ran 1 breaker through our 1,000 watt inverter which gave me that idea.
Thanks for any suggestions.
Our plan is for the MPP to power everything other than the A/C. I was going to just run the Shore power through the MPP and back to the fuse panel. However after reading someone else's post this probably won't work. They said the MPP LV2424 actually throttles the 30amp power to the 2400 watts. I need to be able to have the generator or shore power plugged in running the A/C while the MPP LV2424 powers the coffee pot (700 watts) and air fryer (1450 watts).
I'm hoping there is an easy answer like pull the A/C breaker off the input to the MPP But I have no idea how to do that. In my current rig we only ran 1 breaker through our 1,000 watt inverter which gave me that idea.
Thanks for any suggestions.