Kryptovolteer
New Member
- Joined
- Sep 6, 2022
- Messages
- 3
Hi, I’ve just purchased a voltronic inverter 7kw unit to upgrade my current 4kw unit, this unit had mc4 over contractions so I used a shout extension cut in half to connect to my in coming pv breaker box, when I switched the solar on the united didn’t detect the solar I switched it of double checked everything looked good volt meter confirmed, after confirming with a second unit which is my dads I noticed the pv out put connections were in the opposite way around, removing the bottom cover and following the wires back the pv connections on the box have been installed incorrectly from factory,
Any ideas if the would be an easy fix, would there be fuses on the main board or will it be a return and possibly argument with them
Many thanks
Any ideas if the would be an easy fix, would there be fuses on the main board or will it be a return and possibly argument with them
Many thanks