Newby here.. I made a post awhile back regarding setting up my wifes coffee trailer.. well.. all was/is going well.. I've got my batteries hooked up to a bus bar with fuses at each positive terminal and one big one from the bus bar to the inverter... SO.. all is going well. .I am able to run power throughout the trailer and I hooked up the charge controller which was showing systems go... EXCEPT the panels..> I waited to do them last so I could make sure I wasn't about to burn the thing to the ground... Then I picked up a couple of used panels from a local farmer.. Anyhow, I got them up on the roof, bought a kit to put the ends on because they had been clipped, bought a couple of paralell connectors and hooked them up.. ran them to the charge controller and nothing... showing ZERO point zero... any thoughts would sure be appreciated.. is there a way to test the panels to see if I'm getting output? I thought I'd try to touch the neg to the positive for a second to see if I got a spark and nothing.. I then unhooked the battery from the charge controller and plugged the positive and neg into the panel input to see if it might be the controller.. That didn't give me any indication of power to the controller so maybe it's the controller?? AARRGGHH!