BorisTheCat
New Member
- Joined
- Mar 22, 2022
- Messages
- 4
Hey, everyone.
I'm thinking of getting three of these panels to be hooked up to Electrodacus SBMS40:
Canadian Solar HiKu6 Mono PERC
CS6R 405MS
Nominal Max. Power (Pmax) W 405
Opt. Operating Voltage (Vmp) 31.0 V
Opt. Operating Current (Imp) 13.07 A
Open Circuit Voltage (Voc) 37.0 V
Short Circuit Current (Isc) 13.93 A
Module Efficiency 21.0%
Operating Temperature -40°C ~ +85°C
Max. System Voltage 1500V (IEC/UL) or 1000V (IEC/UL)
Module Fire Performance TYPE 1 (UL 61730 1500V) or TYPE 2 (UL 61730
1000V) or CLASS C (IEC 61730)
Max. Series Fuse Rating 25 A
How would you safely parallel these as 3 or more strings\panels in parallel must be individually fused. Is there a reasonably priced off the shelf solution? Am I better off building my own combiner box?
Thank you.
I'm thinking of getting three of these panels to be hooked up to Electrodacus SBMS40:
Canadian Solar HiKu6 Mono PERC
CS6R 405MS
Nominal Max. Power (Pmax) W 405
Opt. Operating Voltage (Vmp) 31.0 V
Opt. Operating Current (Imp) 13.07 A
Open Circuit Voltage (Voc) 37.0 V
Short Circuit Current (Isc) 13.93 A
Module Efficiency 21.0%
Operating Temperature -40°C ~ +85°C
Max. System Voltage 1500V (IEC/UL) or 1000V (IEC/UL)
Module Fire Performance TYPE 1 (UL 61730 1500V) or TYPE 2 (UL 61730
1000V) or CLASS C (IEC 61730)
Max. Series Fuse Rating 25 A
How would you safely parallel these as 3 or more strings\panels in parallel must be individually fused. Is there a reasonably priced off the shelf solution? Am I better off building my own combiner box?
Thank you.