simoncwindsor
New Member
I recently built my system using the eco-worthy AIO 24V 3k (HF2430U60-100), and I have a question regarding the selection of wire and fuse from the battery to my inverter. For my current 3k system, I've connected 2x12V 150Ah batteries with 2 AWG wire as per the manual's suggestion. Now, I'm planning to upgrade to 4 x 12V 150Ah batteries (2s2p), resulting in a 24V 300Ah configuration.
My concern is whether the 2 AWG wire will be sufficient to handle this increased load or if I should opt for a larger size of copper wire.
Additionally, I'm still uncertain about selecting the appropriate fuse for the connection from the batteries to the device. Currently, I have a 200A T fuse installed between the batteries and the device. Is that correct for me to install 200A fuses for each parallel battery setup?
Thank you for your advice in advance.
My concern is whether the 2 AWG wire will be sufficient to handle this increased load or if I should opt for a larger size of copper wire.
Additionally, I'm still uncertain about selecting the appropriate fuse for the connection from the batteries to the device. Currently, I have a 200A T fuse installed between the batteries and the device. Is that correct for me to install 200A fuses for each parallel battery setup?
Thank you for your advice in advance.