Ok got an email last night, well what I was sent there is a newer model that is shown on Amazon, it's due in the next 30 days. So I'm thinking this is an earlier model and I did fully recharge it last night and now running a 10 AH drain and see how it does. I had it set at 11 volts cutoff so until I can find how to change I will use that for now...
So the support has been impressive, so that's very positive! More to come... Right now if someone is looking for a $199 12v 100 AH, and don't plan ot want to look under the hood this is a good choice now, there is room to put insulation around the cells just not on the bottom but it's got maybe 2"-2.5" of epoxy so that could also help it from very cold temps...
Christopher
So the support has been impressive, so that's very positive! More to come... Right now if someone is looking for a $199 12v 100 AH, and don't plan ot want to look under the hood this is a good choice now, there is room to put insulation around the cells just not on the bottom but it's got maybe 2"-2.5" of epoxy so that could also help it from very cold temps...
Christopher
Last edited: