spittingfire
New Member
Hi All,
I have an 8k Deye hybrid inverter setup with 2 batteries in parallel. Before net metering my settings were "zero export to load" with load first and time of use enabled. This worked well. After net metering was approved and completed the solar company made whatever changes they needed to and here I am posting this question.
The settings have now changed to Grid selling first. Since that change what I have noticed is that my batteries are no longer charging beyond the minimums that was set in time of use.
The setup I am looking for solar powers load first, then charge batteries and if anything is left over sell back to the grid. I would also like to keep time of use enabled in this type of configuration if possible.
I have attached the pages of interest that discussing these particular settings and wondering if the settings of "Zero Export To Load" with "Solar Sell" selected is the option I should use to achieve what I am looking for.
Are any of you familiar with the Deye 8k hybrid inverter settings that can guide me with the correct setup to achieve what I am looking for?
Thanks in advance and much appreciated!
I have an 8k Deye hybrid inverter setup with 2 batteries in parallel. Before net metering my settings were "zero export to load" with load first and time of use enabled. This worked well. After net metering was approved and completed the solar company made whatever changes they needed to and here I am posting this question.
The settings have now changed to Grid selling first. Since that change what I have noticed is that my batteries are no longer charging beyond the minimums that was set in time of use.
The setup I am looking for solar powers load first, then charge batteries and if anything is left over sell back to the grid. I would also like to keep time of use enabled in this type of configuration if possible.
I have attached the pages of interest that discussing these particular settings and wondering if the settings of "Zero Export To Load" with "Solar Sell" selected is the option I should use to achieve what I am looking for.
Are any of you familiar with the Deye 8k hybrid inverter settings that can guide me with the correct setup to achieve what I am looking for?
Thanks in advance and much appreciated!