sunny1972
New Member
- Joined
- May 17, 2022
- Messages
- 7
Hi
I have a fuse sizing question for an EDECOA 12v 3500/7500 inverter that I have connected to a 60A AmpInvt MTTP Solar Charge Controller, my batteries are 2x 750Ah LiFePo4 and I have 1.5 KWh Solar Array connected.
I have seen many installations with a fuse breaker on the positive cable to the inverter and thought, hmmm - I haven't done that....so I figured, let's do this as good practice.
My stumbling block is the inverter has the following DC cable supplied; it's a 16mm2×2 pair, I am thrown off by the fact that it says "pair". On a recent fuse sizing chart I saw that a 60A fuse should be fine for 16mm2 cable, but the pair threw me. The cable does indeed have two cables connected to a terminal, so I am guessing that each is 16mm2.
I would really appreciate your help on this, thanks for reading.
Sunny
I have a fuse sizing question for an EDECOA 12v 3500/7500 inverter that I have connected to a 60A AmpInvt MTTP Solar Charge Controller, my batteries are 2x 750Ah LiFePo4 and I have 1.5 KWh Solar Array connected.
I have seen many installations with a fuse breaker on the positive cable to the inverter and thought, hmmm - I haven't done that....so I figured, let's do this as good practice.
My stumbling block is the inverter has the following DC cable supplied; it's a 16mm2×2 pair, I am thrown off by the fact that it says "pair". On a recent fuse sizing chart I saw that a 60A fuse should be fine for 16mm2 cable, but the pair threw me. The cable does indeed have two cables connected to a terminal, so I am guessing that each is 16mm2.
I would really appreciate your help on this, thanks for reading.
Sunny