Andrew Shinn
New Member
I have an eg4 3kw inverter and eg4 48v server rack battery. When I plug the inverter into a 15a outlet it starts charging the battery for a few seconds then trips the gfci on the outlet.
I have tried changing setting 11 max charging current to 15a but it still trips the gfci. It is not tripping the breaker, just the gfci on the outlet
I have tried different outlets and it does the same thing.
Any ideas?
My settings are all set to what's recommended in the manual except for setting 11 I changed to 15a
I have tried changing setting 11 max charging current to 15a but it still trips the gfci. It is not tripping the breaker, just the gfci on the outlet
I have tried different outlets and it does the same thing.
Any ideas?
My settings are all set to what's recommended in the manual except for setting 11 I changed to 15a
Last edited: