Skytrak (megarevo) 8k inverter powring itself frim grid

[nismo4]

I have a Skytrak 8k MV01-8048 inverter that is powering itself from Grid instead of Battery or PV. As a result I have a constant power consumption from the grid.

Is there a setting that can be changed to make the inverter not power itself from Grid or at least reduce the amount that it takes from Grid?

Ps. I have no problem with the load from the house. That is being handled by PV and Battery. Only the inverter is powering itself from Grid.

 

[WrenchLight]

Set CT limit power to zero. Then try adjusting the zero export power setting. This can adjust up or down to target zero current at the CTs. Reminder that once the battery is down to the target state of charge, it will draw power from the grid if there's no solar.

 

[askel]

Set CT limit power to zero. Then try adjusting the zero export power setting. This can adjust up or down to target zero current at the CTs. Reminder that once the battery is down to the target state of charge, it will draw power from the grid if there's no solar.

Hi. Where exactly do you set those in the Megarevo settings?

 

[WrenchLight]

Hi. Where exactly do you set those in the Megarevo settings?

Oops. I forgot that option didn't exist in that firmware.