Wondering if any others are having issues with the Sol Ark 12k reporting out smart load correctly. Before I hooked up a 240v 1500 watt duel element electric water to the smart load Generator breaker. I hooked a 120v 1500 watt electric heater to a temporary outlet I ran off the gen breaker to see if it worked properly and to record the amount of energy consumed. I noticed the smart load would turn on and off like I programed it but showed 0 hz and only 3 to 4 watts while the heater was running. I contacted Sol Ark's help line, they updated to current firmware, but did not have an answer. After two weeks the consumption I tracked off my Sense energy monitor showed I had enough potential energy from my PV for a long enough period of time to hook up the water heater. I did this last night and today when I checked the unit displayed the correct wattage, but still 0 hz, just wanted to see if others have ran into his issue.