I have my Generac Genset hooked up to my Sol-ark 15k using a 2 wire start. I wired my T1 wires to a 240 fused breaker and the N1 to a 120v breaker both in the load panel. The inverter starts and exercises the genset as expected. It also is able to start the generator whenever I click the GEN FORCE check box in the charge settings. However, if I want the generator start at a certain percentage, when the batteries drop to that point, I can hear the inverter clicking (on/off?) trying to start the generator. Every once in awhile I also see the signal on being displayed on the panel, but it is for a brief moment. To me, it's almost as if the inverter isn't send the signal long enough to power it on.
Has anywhere experienced this before?
Has anywhere experienced this before?