upontheridge
New Member
I have a Keystone RV with the Solarflex 200i system. The panel that came with that system is an OEM-exclusive panel. Specs on the back of the panel are below along with specs from Rich Solar Mega 24v Panel. Are these panels similar enough to use together and if so, would you recommend connecting them in parallel or series? The wiring from the Jaboni port on the roof to the SCC is 10-gauge wiring. The current SCC is a Victron75/15. I will upgrade to 100/30 before installing unless a 100/50 would be recommended.
Panel Model | Keystone 0EM made by Allesun-200-3611 | Rich Solar Mega 24V Panel |
Rated Maximum Power (Pmax) | 200W | 200W |
Voltage at Maximum Power (VMP) | 41.70v | 37.6v |
Current at Maximum Power (Imp | 4.8a | 5.32A |
Open Circuit Voltage (Voc) | 49.8v | 45.4V |
Short Circuit Voltage (Isc) | 5.09A | 5.83A |
Tolerance | 0 to 5% | |
Maximum System Voltage | 1500vdc | 1000VDC |
Maximum overcurrent protection | 15a | 15A |
Dimension | 10.75x39.45x1.38 | 58.7x26.5x1.4 |
Weight | 26.46lbs | 26.5 |