Pashich
New Member
- Joined
- Jan 28, 2021
- Messages
- 31
Hello Friends!
Can somebody explain me how XTRA/Tracer works with 'boost' settings.
I have the following settings, attached. With boost 14.2; boost reconnect 13.3, boost dur 10min; and float chg 13.6.
Once I power on XTRA N it keeps charging untill 14.2 and rests there for 10min. Than float is activating and voltage drops gradually to 13.6.
Than I connect load and voltage drops to 12.83, but float mode is stills active. I wonder why controller simply ignores "boost reconnect 13.3" and still operates at float, or it is designed this way?
Only power off/on helps to activate boost again.
Can somebody explain me how XTRA/Tracer works with 'boost' settings.
I have the following settings, attached. With boost 14.2; boost reconnect 13.3, boost dur 10min; and float chg 13.6.
Once I power on XTRA N it keeps charging untill 14.2 and rests there for 10min. Than float is activating and voltage drops gradually to 13.6.
Than I connect load and voltage drops to 12.83, but float mode is stills active. I wonder why controller simply ignores "boost reconnect 13.3" and still operates at float, or it is designed this way?
Only power off/on helps to activate boost again.