Update (bluetooth) App ist Not the smart BMS App. Ready the hole Thread. No Code needed.
Today's Daly SmartBMS Android App Update forces a firmware update which fails
- Thread starter vejeriego
- Start date
Am făcut asa ,sa update dar nu am acces la toate setările,am închis charge și dischearge ,nu le pot deschide când apas ,,on,,cere password bag password și ma deconectează de pe BT
Ce app LEDT ,dați un link va rog
There ist the Update App
diysolarforum.com
Files above
diysolarforum.com
Today's Daly SmartBMS Android App Update forces a firmware update which fails
to fix the problem on bms daly i think it can only be done by changing the firmware. The following is a good tutorial with a PC or Android phone and firmware that I got from Daly. now my bms is back to work normally I hope in the future Daly will not do stupid things like this again
diysolarforum.com
Files above
Today's Daly SmartBMS Android App Update forces a firmware update which fails
my android app didn't find any bms bluetooth signal... and when i open daly bms official app i find my bms bluetooth signal... have you pressed the plus sign on the top right and select firmware file? as i remember, bluetooth should appear once the firmware is selected
diysolarforum.com
Salut,am băgat și eu acest update la 4s ,pot accesa bms dar nu pot deschide nici change și nici discharge, ce pot face
deanobeano
New Member
- Joined
- Dec 30, 2022
- Messages
- 1
4S 12V BMS for me (built in to a off the shelf 60 Amp/hr drop in replacement battery.)
I got mine to unbrick by opening up the case and unplugging the cell balance and temp sensor leads. I also unbolted the Neg cable to the cells and left it disconnected for 5 mins.
On reconnection, all works on 2.0.0 software.
I upgraded to the latest software and it initially worked, but then 'locked' again (not showing SOC, Amps or sensor info).
Repeated the disconnection sequence and left it working on 2.0.0 - it's charging at the moment (been a couple of hours) and is working as expected.
I got mine to unbrick by opening up the case and unplugging the cell balance and temp sensor leads. I also unbolted the Neg cable to the cells and left it disconnected for 5 mins.
On reconnection, all works on 2.0.0 software.
I upgraded to the latest software and it initially worked, but then 'locked' again (not showing SOC, Amps or sensor info).
Repeated the disconnection sequence and left it working on 2.0.0 - it's charging at the moment (been a couple of hours) and is working as expected.
havi_hausmeister
New Member
- Joined
- Dec 24, 2022
- Messages
- 38
Ich suche für mein 8s 100A BMS GD230 309E die Firmware ohne den Fehler in der Strommessung.
Bitte teilen oder zumidest die Bezeichnung durchgeben!
Bitte teilen oder zumidest die Bezeichnung durchgeben!
i had to disconnect everything even the battery connects and fully discharge the BMS then reactivate it using the 2.1.1 side load from apkpure to get mine working. i tried everything in the book to get a reading with the pcmaster and sinopoly pc software but not even a small reading or able to flash any firmware. if someone has a valid firmware for this please link it to me. thanks
I have same BMS, please how did you do it? Thank you
havi_hausmeister
New Member
- Joined
- Dec 24, 2022
- Messages
- 38
Ausgezeichnet!
BmsGD32E230_309_20220224_CADC.zip
funktioniert am 8s 100A GD230-309E mit ausreichender Stromanzeige ohne rumgezappel!
Bleibt nur noch die Frage, ob der CAN funktioniert?
Hardware / 3inch Display ist noch per Post unterwegs. Abwarten .
Nutzt jemand anders die Firmware an gleicher oder ähnlicher Hardware? Daly wollte/konnte mir die Version nicht schicken.
Übrigens:
Firmware Name Ende CADC
correct (a?) Direct Current
DANKE towatai
Hi Guys,
Finally my BMS is also up and running, BmsGD32E230_303(32_221130_100T).s19 firmware file worked and BMS is back up and running.
Thanks to this great community!!
The challenge with Daly BMS have given some thoughts for reflection, given the (total) lack of answers from Daly themselves and shitty communication from their side is making me wonder; is Daly the right company to bet on when it comes to critical battery management?
Do you guys recommend any other BMS products?
Finally my BMS is also up and running, BmsGD32E230_303(32_221130_100T).s19 firmware file worked and BMS is back up and running.
Thanks to this great community!!
The challenge with Daly BMS have given some thoughts for reflection, given the (total) lack of answers from Daly themselves and shitty communication from their side is making me wonder; is Daly the right company to bet on when it comes to critical battery management?
Do you guys recommend any other BMS products?
Similar threads
