Thanks much !If all you have is a BMV/smartshunt, there's not a lot the GX can do for you unless you want online monitoring and complete remote control.
I would just like something I can walk in the room push a button and see what's up. Total newbie, novice. Thanks for the replyWhen I want to get a quick view of the battery status the Touch 50 is handy. But I mainly use it to turn my inverter on/off. I do have my Touch 50/Cerbo GX setup to display the temp/humidity of the wireless Ruuvi devices that I put in various locations (inside, outside, refrigerator and freezer).
My Cerbo GX is not setup for remote access. Someday it will be.
I would just like something I can walk in the room push a button and see what's up. Total newbie, novice. Thanks for the reply
YupI actually find quicker info on the Victron app than on my CCGX. Usually when I want to know the status of the battery I open the app on my phone.
Especially since the last software upgrade.
View attachment 109266
I can now quickly see I have 71% battery capacity and 2+ days until my battery hits bottom.
I think the GX device (Cerbo+Touch or CCGX) really makes since when you get the inverter especially if you have solar. That’s where it really shines (pun totally intended ?).
Good Luck
I only have a smart shunt, from Victron. Everything I need is on the pre app. And only plan to add a second shunt.
I only have a smart shunt, from Victron. Everything I need is on the pre app. And only plan to add a second shunt.
I'm going to say no. Because I don't know what that is. lolDo you need Node RED for that?