packnrat
New Member
just found out about wire ferrels. made from tin coated copper.
they are thin metal to just hold the wire together so as to make the connection under the holding set screw. makes the wire able to be pulled out and put back after.
small dia there is a tool. but larger gets crushed to shape by the set screw.
these are not crimp connector. just a way to hold all the strands in place, under the set screw. and able to remove for service. then pushed back into place.
i gleaned this from a car stereo site.
they are thin metal to just hold the wire together so as to make the connection under the holding set screw. makes the wire able to be pulled out and put back after.
small dia there is a tool. but larger gets crushed to shape by the set screw.
these are not crimp connector. just a way to hold all the strands in place, under the set screw. and able to remove for service. then pushed back into place.
i gleaned this from a car stereo site.