cgccpres98
New Member
- Joined
- Nov 11, 2020
- Messages
- 8
I assembled a large battery bank of 32 280ah cells. It is configured in 2p16s. I have an ANT BMS rated for 300 amp 180 continuously. According to the BMS I have a total voltage of 52.6v, but if I put and actually volt meter in the total + and - terminal I get about 115v. Shouldn't the total voltage at the end terminals be the same as the BMS about 52.6v? The inverter is a Deye 8kw. I haven't connected it yet because I don't want to exceed the maximum voltage of about 56v. I included pictures of they diagram I was trying to accomplish and how its actually connected. I also included a screen shot of the BMS report. The most important question is this okay to connect to the Deye inverter in the current setup? Thanks for the support!