Mountainlion
New Member
- Joined
- Jul 10, 2020
- Messages
- 50
My Daly Smart BMS 4S (200A) is not registering small loads? I have a parasitic draw around 1.1A/h in my travel trailer.
The Daly BMS show 0. My Victron shunt shows 1.1 A.
As the Daly BMS does not show small loads it also stop calculate SOC. So big difference in calculated SOC between Victron and Daly.
Another consequence is that the BMS goes in to sleep mode. (Can not be accessed over Bluettoth) until I wake it up by applying a bigger load or charge.
Is this normal?
Is there any parameters that needs to be changed in the BMS?
The Daly BMS show 0. My Victron shunt shows 1.1 A.
As the Daly BMS does not show small loads it also stop calculate SOC. So big difference in calculated SOC between Victron and Daly.
Another consequence is that the BMS goes in to sleep mode. (Can not be accessed over Bluettoth) until I wake it up by applying a bigger load or charge.
Is this normal?
Is there any parameters that needs to be changed in the BMS?