Hello! We’re running a relatively small solar system and recently have begun seeing dc overload faults on our Conext SW 2524 inverter. I’m not even really sure what information to provide or what to ask so I’ll just state what I know and see what someone who knows what they’re talking about thinks.
Charge state used to be on float and now is only on either bulk or standby and will not change
Equalize is set to disabled and will not turn on
Generator (7500) watt will consistently create dc overload
Says recharge level set to 25.1. What does this do? Start or stop recharge at set amount?
Inverter set to 30amp max but we have 70amp total charge controllers hooked up to solar.
Sorry if this isn’t enough to get a clear idea. Please let me know what info is required for advice to be given and I will do my best. We had a friend set up this solar system and he is well.. unreliable. Thank you in advance for any assistance you can give.
Charge state used to be on float and now is only on either bulk or standby and will not change
Equalize is set to disabled and will not turn on
Generator (7500) watt will consistently create dc overload
Says recharge level set to 25.1. What does this do? Start or stop recharge at set amount?
Inverter set to 30amp max but we have 70amp total charge controllers hooked up to solar.
Sorry if this isn’t enough to get a clear idea. Please let me know what info is required for advice to be given and I will do my best. We had a friend set up this solar system and he is well.. unreliable. Thank you in advance for any assistance you can give.
Last edited: