Beene Brothers
Owner
Just put my Megarevo on the wall. And I've posed this question to my reseller at Lovesun but it's the weekend over there already. Anyone have pointers on what I might be doing wrong? I took a video showing the status of the inverter.
These two arrays were already operational on a grid tie string inverter. 5x 400w Jinko's on both strings (250voc).
Battery is a 16s LiFePo4 at 56V. Doesn't have a fancy BMS right now so no communication the the inverter at this time.
Do have a connection to grid up and running, as before this connection was being used for the previous grid tie inverter.
I see voltage for PV1 and PV2 as I should.
Set to self consumption but also tried battery priority.
CT's don't reach my electrical panel but I stuck them on another grid tie inverter in a way that I got negative numbers, indicating pulling power from the grid currently.
Battery is set to lead acid with charge voltage of 57.
I should have went through all of the settings in a video as well. I can do that tomorrow. It's one of those things where there aren't many settings so I'm banging my head against a wall not understanding why the inverter isn't turning on. There are no alerts/errors!
Video Link:
These two arrays were already operational on a grid tie string inverter. 5x 400w Jinko's on both strings (250voc).
Battery is a 16s LiFePo4 at 56V. Doesn't have a fancy BMS right now so no communication the the inverter at this time.
Do have a connection to grid up and running, as before this connection was being used for the previous grid tie inverter.
I see voltage for PV1 and PV2 as I should.
Set to self consumption but also tried battery priority.
CT's don't reach my electrical panel but I stuck them on another grid tie inverter in a way that I got negative numbers, indicating pulling power from the grid currently.
Battery is set to lead acid with charge voltage of 57.
I should have went through all of the settings in a video as well. I can do that tomorrow. It's one of those things where there aren't many settings so I'm banging my head against a wall not understanding why the inverter isn't turning on. There are no alerts/errors!
Video Link: