DIY Senior
New Member
- Joined
- Aug 25, 2022
- Messages
- 10
Hello All,
New to group here looking for some opinions, advice and recommendations. I am starting a major project that will eventually generate many requests for advice but for now will keep it simple.
The battery part of the project:
I am looking to build 4 12v LifePo4 high capacity batteries. For the 16 cells I am leaning toward the EVE LF280k units. I wouldn’t mind the higher capacity cells but the premium price and much lower cycle life seems like a poor trade-off.
For the BMS I am looking at the JK B2A8S20P 200amp version since by my calculations I may pull up to 600 amps at peak (4p 12v batteries…4 x 200a)
Any comments, thoughts, corrections, etc will be extremely welcome.
Thanks, DIY/DIR Randy
New to group here looking for some opinions, advice and recommendations. I am starting a major project that will eventually generate many requests for advice but for now will keep it simple.
The battery part of the project:
I am looking to build 4 12v LifePo4 high capacity batteries. For the 16 cells I am leaning toward the EVE LF280k units. I wouldn’t mind the higher capacity cells but the premium price and much lower cycle life seems like a poor trade-off.
For the BMS I am looking at the JK B2A8S20P 200amp version since by my calculations I may pull up to 600 amps at peak (4p 12v batteries…4 x 200a)
Any comments, thoughts, corrections, etc will be extremely welcome.
Thanks, DIY/DIR Randy