MikeMynis
New Member
- Joined
- Apr 21, 2022
- Messages
- 69
Hi guys,
I've bought Victron equipment but I find it difficult to figure out how to connect all of them together for communication.
I already asked this question in the Victron community, but all I get is a link to a document with some general information.
So that's not helpful at all.
My question is how to connect these devices together for COMMUNICATION:
I already have a VE.Can to CAN-bus BMS, type A cable for communication between the MPPT RS 450/200-TR and the Pylontech battery bank (5 x US3000C)
But how to connect the rest for correct communication?
Which cables (and terminators, if needed) do I need and in which ports of the devices do I connect them, so that everything can talk to each other?
Thanks in advance
Mike
I've bought Victron equipment but I find it difficult to figure out how to connect all of them together for communication.
I already asked this question in the Victron community, but all I get is a link to a document with some general information.
So that's not helpful at all.
My question is how to connect these devices together for COMMUNICATION:
- 2 x MultiPlus-II 5kVA - 230V (for parallel operation)
- Cerbo GX
- GX Touch 70
- SmartSolar MPPT RS 450/200-TR
I already have a VE.Can to CAN-bus BMS, type A cable for communication between the MPPT RS 450/200-TR and the Pylontech battery bank (5 x US3000C)
But how to connect the rest for correct communication?
Which cables (and terminators, if needed) do I need and in which ports of the devices do I connect them, so that everything can talk to each other?
Thanks in advance
Mike