Fivespeed56
New Member
I have constructed two 8S 24-volt 304 AH batteries using EVE 304 AH 3.2-volt cells. I will connect them to a bus for a total of one 8S2P 24-volt 608 AH battery pack.
I have two questions.
Absorption Voltage:
Float Voltage:
Equalization Voltage:
Re-Bulk Voltage offset:
Absorption Duration: (Adaptive/Fixed)
Maximum Absorption Time:
Tail Current:
Equalization Current Percentage:
Automatic Equalization: (Disabled / Equalize every ____ Days)
Equalization stop mode: (Fixed Time / Automatic on Voltage)
Maximum Equalization Duration:
Temperature Compensation (mV/°C):
Low-Temperature Cutoff (optional):
I have two questions.
- First, I am looking the proper charging parameters for the cells after building in this configuration. I am charging with the Victron SmartSolar 150/85 CC. I’ve attached a screenshot of the battery settings page from the Victron Connect App. The setting in the screenshot were for BAttleborn 12-V so they obviously do not apply tomy situation. Can anybody please tell me what you recommend for these settings.
Absorption Voltage:
Float Voltage:
Equalization Voltage:
Re-Bulk Voltage offset:
Absorption Duration: (Adaptive/Fixed)
Maximum Absorption Time:
Tail Current:
Equalization Current Percentage:
Automatic Equalization: (Disabled / Equalize every ____ Days)
Equalization stop mode: (Fixed Time / Automatic on Voltage)
Maximum Equalization Duration:
Temperature Compensation (mV/°C):
Low-Temperature Cutoff (optional):
- Second, and this is not critical, just for curiosity and learning: