Here is a picture of my setup. I don’t have a breaker between my battery and inverter yet because I wanted to see if the new inverter would work without issue.
Inverter continues to restart.
- Thread starter Skegeej
- Start date
The only breakers I currently have is between battery/controller and panel/controller.Just looking at OPs previous issues with this inverter. Wires seem ok size, but other areas are confused!
Inverter beeping
I’m setting up my system in a shed in my yard. I have a 3000W inverter by xwjne and 2 100ah batteries connected in parallel. I connected everything except the panels and the controller serms to connect fine. However my inverter continues to beep and the fault light is in. Inverter is connected...diysolarforum.com
And there is definitely at least one cheap breaker installed for something...
Yes, I am.
Bud Martin
Solar Wizard
- Joined
- Aug 27, 2020
- Messages
- 4,844
Something not making sense to see the Voltage jumps up to 30V.
Turn off the breaker between PV panel and the Charge controller first, then turn off the breaker between chart controller and the battery and then turn on the inverter to see what will happen. I think the Epever output is spiking up the Voltage, there are threads about this issue.
Turn off the breaker between PV panel and the Charge controller first, then turn off the breaker between chart controller and the battery and then turn on the inverter to see what will happen. I think the Epever output is spiking up the Voltage, there are threads about this issue.
73powerstroke
Solar Enthusiast
I dont see anything wrong really but I would do like bud said. Or just remove everything and power the inverter directly to the batteries first and see if it works. Something is wrong here
Hello
I tried what you said and shut the breakers to controller off and just turned on inverter. Should have thought of that but anyhoo. Again inverter still shut off. So I think even though it’s a replacement it is still bad.
73powerstroke
Solar Enthusiast
Is it still spiking to 30v?
It doesn’t spike to 30v however it goes to 19v and shut off again.
73powerstroke
Solar Enthusiast
I think your inverter is toast. Also cheap breakers are bad news. I've seen a few cases even where nice ones are bad.
Last edited:
