houseofancients
Solar Wizard
contact seplosHello
I read about setting the BMS to ginlong
But I do not find this setting at all
I have a 10c.
contact seplosHello
I read about setting the BMS to ginlong
But I do not find this setting at all
I have a 10c.
it is the 10e, i have exactly the same on my 10e.No mine is the '1101-SP16' if that means anything to anyone. I believe it's the model just before the bluetooth BMS. Perhaps that works in a similar way. Looks like i've got some reading to do.
already didcontact seplos
Did you ever manage to access the Bluetooth? If I do a scan using my iPhone, it can’t find it.it is the 10e, i have exactly the same on my 10e.
bluetooth is part of the display and sold seperately
I managed to connect to it via iPhone; you need to downloadDid you ever manage to access the Bluetooth? If I do a scan using my iPhone, it can’t find it.
yes, although i have to be pretty close to the boxes ( as in with 1m or so)Did you ever manage to access the Bluetooth? If I do a scan using my iPhone, it can’t find it.
What's the trick to get past the login screen? I just get this ...I managed to connect to it via iPhone; you need to download
![]()
I found it only works if I’m no more than 2m away from the BMS
adminWhat's the trick to get past the login screen? I just get this ...
what this actually does:Has anyone had any luck turning Single BMS 1.0C charging on? I've tried, but get the below error.
View attachment 139977
I'm using battery monitor 2.1.9 and firmware 2.8.
I was worried a couple of strings were down one one of my arrays at first when one controller was pulling over 4KW and he other 1KW.
what this actually does:
in a single battery this setting sets the max charge setting in the inverter through canbus to .5 c -10 amps.
flipping this switch will allow charging to the max of the bms rating, so make sure your cells can handle that.
sometimes you need to restart the bms bluetooth app as i find it not always too stable.
using pc software 1.9 it shouldnt be an issue
it really depends on the usb to rs485 adapter you're using, and especially if it has grounding...I have found the Android phone app to be more reliable with changing settings than the PC software, almost everytime I want to change something in the PC Software I get errors, where as the phone app is 90-95% consistent, and usually if I just change settings 1 at a time, it always works.
Which one did you finally settle on?it really depends on the usb to rs485 adapter you're using, and especially if it has grounding...
the cheaper CHXXX based adapters in general dont have a grounding connecting, and i went through 3 before i finally found a stable alternative
the seplos one ;-)Which one did you finally settle on?
I also am using the seplos one as well. They charged something $20 for it ? they wouldn't throw it in after spending thousands with them.the seplos one ;-)