houseofancients
Solar Wizard
have you updated your SA ?View attachment 173901
Maybe from the local ip only?
even on my mobile ( not on WiFi ) i see the advanced button
should be there on the latest stable (2023-08-16) and up
have you updated your SA ?View attachment 173901
Maybe from the local ip only?
I have the latest stable. The screenshot I sent is from the advanced tabhave you updated your SA ?
even on my mobile ( not on WiFi ) i see the advanced button
should be there on the latest stable (2023-08-16) and up
Are you on the latest beta?have you updated your SA ?
even on my mobile ( not on WiFi ) i see the advanced button
should be there on the latest stable (2023-08-16) and up
yes i am , but this option has been there for a long time, so i don't get itAre you on the latest beta?
Yes, that I do get too because it does get some data from your first battery, but can't make heads or tails of the dataI got it now. It's because I never had SA connected to the battery. I was using inverter values. Does yours also cycle through invalid data retrying and connected? View attachment 173925
I see that it's taking SOC from the second pack and not the inverter. For some reason my second pack discharges slower than the master.Yes, that I do get too because it does get some data from your first battery, but can't make heads or tails of the data
there is not a single issue using multiple batteries at all with sunsynk/deye/sol-ark communicationsreading through the above it appears as though there is an issue adding a second seplos battery to a sunsynk inverter? i already have a 280L (14.3kw) and was looking to add another in the next month or so. is the issue that you cant read the battery data or is it that the functionality is affected and you cant use the batteries to their full capacity.
i assumed (a bad idea generally) that i could just link the batteries together and then add comms cable between the two batteries and i would be able to fully utilise the two batteries (which would be one large one?) and view data or make alterations?
(ps @houseofancients the earlier issue i had re not appearing to be charging fully overnight seems to have resolved itself ...)
Be careful..I did look on his website. I'll go look again. Thanks
Can anyone tell me if the bus voltage should be different from the battery voltage?
What specific changes has been made in that firmware?Be careful..
The firmware for the seplos 10e in Andy's zip file is specific for Victron..
The latest non Victron version is :
CAN1101[V16.06.05_PN01_230916_SP80](MOS闭合开机间歇充
Was it ever working before or first timeHello,
Newbie here.
I have recently built a Seplos / Mason battery using the V3 BMS and active balancer.
I decided to update the FW to the latest version, since doing this:
i) I can no longer connect to the BMS from my PC (using same cable and settings as before)
ii) The BMS does not stay switched on, I have to hold the reset button in for the display to stay active, I can then toggle through the menus but the contents are all missing (e.g. cell Voltages = 0 which is not possible as the BMS is powered from somewhere)
Any suggestions on how to recover things? I have emailed Seplos and Fogstart (kit vendor)
Thanks
Ben
Yes it was working for some days before I decided to upgrade.Was it ever working before or first time
Yes it is the 200A version of V3 and the add on active balancer PCB.Are you sure that you have a V3, most of these battery boxes are still shipping with the V2/10E version.
I would like to have thought you couldn't put the wrong firmware on but it doesn't seem promising.