This setup is for our off-grid Oklahoma property, which has a work area consisting of 3 shipping containers. We will have three sets of lights, each pulling 130w. Each set of lights is in a different container, and the containers are right next to each other. We plan on using the system to power the lights, charge batteries for our tools, and occasionally run a chop saw and small table saw. The batteries will be located in one of the uninsulated shipping containers, but housed in an insulated box during the cold months. We are onsite at least twice a week, and the lights will not be used when we are away. The solar panels will be placed on top of one of the containers, which is completely unshaded.
This is what I am currently thinking. Any advice would be great appreciated. Thank you very much.
Solar Panels: (2) Newpowa 9BB 200w monos (Voc: 21.8v each)
Charge Controller: HQST 40a
Inverter: GIANDEL 2200W w/ terminal block
Batteries: (2) 12v SOK 100ah LiFePO4 (bluetooth and heater)
We will be using fuses, disconnect switches and a shunt.
This is what I am currently thinking. Any advice would be great appreciated. Thank you very much.
Solar Panels: (2) Newpowa 9BB 200w monos (Voc: 21.8v each)
Charge Controller: HQST 40a
Inverter: GIANDEL 2200W w/ terminal block
Batteries: (2) 12v SOK 100ah LiFePO4 (bluetooth and heater)
We will be using fuses, disconnect switches and a shunt.