diy solar

diy solar

Batteries finally arrived....where do i start?

Roqm

New Member
Joined
Jun 17, 2020
Messages
228
I intend to parallel all the modules when i begin to install everything i am leaving them connected to they stay balanced, voltage sitting at 567v i only checked one today will open both when my gloves arrive...p.s kokam moduels (13s 3.7v nominal nmc).
20201019_143845-jpg.25370
20201019_145332.jpg20201019_145344.jpg
 

Attachments

  • 20201019_143845.jpg
    20201019_143845.jpg
    128 KB · Views: 423
Good god, where to start indeed. You building a nuclear power plant with those?
 
Ah. High voltage. I though that was a typo when you followed it with 13S "modules". Then I read the data plate.

Then I pooped my pants a little.

Yes. Glubs.
 
Crikey, I thought it was a 56V battery too. That's a mistake you don't want to make.
 
Heh... the key is 52A @ 577V to yield 26,500W of discharge power. In comparison the battery in a Prius yields a whopping 30,000, but it's tapped out in about 2 minutes. :)
 
I am curious as to what they were built for originally.
And what type of cells they are Lipo, LTO, or other.
And yeah, 600 AC is a serious thing to work with, 600DC is wild.
 
I am curious as to what they were built for originally.
And what type of cells they are Lipo, LTO, or other.
And yeah, 600 AC is a serious thing to work with, 600DC is wild.
They are "community energy storage" search for "energy storage project" on the tube
 
Back
Top