S Davis
Solar Enthusiast
- Joined
- Sep 25, 2021
- Messages
- 608
I have a mobile system in my work vehicle that is using a Redarc 50 amp dc/dc charger, it works good except it’s charge profile is set to 14.5v and my two 12v 280ah battery packs with Daly 200amp BMS are tripping on high cell voltage. The cells are great until they hit 3.5 and then I will get over voltage on one cell. At this point I turn on charging and keep an eye on it and shut off when at 3.5 per cell.
I am changing my inverter to a Multiplus 3000 and figure while I’m at it I should change the dc/dc charger too, what is the best BMS to integrate into a mobile Victron system, not really worried about price I need good integration and reliability.
Thanks in advance for any help.
I am changing my inverter to a Multiplus 3000 and figure while I’m at it I should change the dc/dc charger too, what is the best BMS to integrate into a mobile Victron system, not really worried about price I need good integration and reliability.
Thanks in advance for any help.