Assuming they test good, I would just pay to have the vendor laser weld studs to the cells.
I am getting a few hundred pounds of compression from my m6 studs. Of course the holes were properly tapped, which makes a difference.
1/4" bus bars need to be polished flat unless you have a 5/8" stud you can torque to the max.
I am getting a few hundred pounds of compression from my m6 studs. Of course the holes were properly tapped, which makes a difference.
1/4" bus bars need to be polished flat unless you have a 5/8" stud you can torque to the max.