I'm wondering if anyone here has had personal experience with this combination. The 7713 consumes a mere 13mA when on, which is great. It also appears to have the correct outputs to operate this relay. However, I can't use the Cargery BMS with it if this BMS can't drive the relay.
Chargery indicates that max 2.5A is available on the Charge/Discharge relay circuit. BlueSea indicates this relay requires <7A to change state. It's not clear how much less than 7A will actually work, or work reliably.
Anyone have experience with these two?
Cheers,
Doug
![7713 pic.png 7713 pic.png](https://diysolarforum.com/data/attachments/9/9647-6a09f282bf922082de2e403c12cda006.jpg)
Chargery indicates that max 2.5A is available on the Charge/Discharge relay circuit. BlueSea indicates this relay requires <7A to change state. It's not clear how much less than 7A will actually work, or work reliably.
Anyone have experience with these two?
Cheers,
Doug
![7713 pic.png 7713 pic.png](https://diysolarforum.com/data/attachments/9/9647-6a09f282bf922082de2e403c12cda006.jpg)