I love that they will send out what must obviously be preproduction definitely-not-ready-for-market units to people who will shill/not test... Then won't send you one because you'll expose the half baked/non-functional bits.I was at ces yesterday and the ones on display were non functional so I didn't get any good information on it. I'll get one when they sort out the firmware. They said they don't want to send me anything until it's working perfectly.
Pretty expensive. So much easier to connect an all in one to some server rack batteries. Easier to expand too. And lower in price.
I love that they will send out what must obviously be preproduction definitely-not-ready-for-market units to people who will shill/not test... Then won't send you one because you'll expose the half baked/non-functional bits.
A few hundred!Seems like they hit up a few YTubers to market this.
7.2kw inverter with ability to parallel 3 for a total of 21.6Kw.
Can parallel 15 battery’s for a total of 90kwh.
I will give them this.
It’s pretty simple and straightforward.
Jerry showed it on a hand truck.Kinda heavy for portability.
Inverter - 70 lbs.
Battery - 116.4 lbs.
True enough but you know people..I was at ces yesterday and the ones on display were non functional so I didn't get any good information on it. I'll get one when they sort out the firmware. They said they don't want to send me anything until it's working perfectly.
Pretty expensive. So much easier to connect an all in one to some server rack batteries. Easier to expand too. And lower in price.
When your bug out vehicle has a liftgate.Kinda heavy for portability.
Inverter - 70 lbs.
Battery - 116.4 lbs.
Or a ramp.When your bug out vehicle has a liftgate.
@Will Prowse Would an EG4 6000xp fit on top of a Ruixu server rack? Like you did with the lv6048 on top of the eg4 server rack.I was at ces yesterday and the ones on display were non functional so I didn't get any good information on it. I'll get one when they sort out the firmware. They said they don't want to send me anything until it's working perfectly.
Pretty expensive. So much easier to connect an all in one to some server rack batteries. Easier to expand too. And lower in price.
I don’t see why not, planning on doing just that, including small beaker panel for a semi-portable solution ??@Will Prowse Would an EG4 6000xp fit on top of a Ruixu server rack? Like you did with the lv6048 on top of the eg4 server rack.
Grid tied all in one inverters do I believeWow, it seems every youtuber and their mother is getting / reviewing these units!!
It does look pretty interesting. Seems like it's relatively easy to setup, and using the Smart Panel 2 for critical loads and for managing TOU arbitrage is cool.
Bummer it doesn't allow for the grid-tied solar on the roof to keep working when disconnected from the grid. I guess that's only an option in full-blown-systems like Powerwall, Franklin, Enphase, etc? Do any of the DIY systems provide this kind of functionality?