EG4 6000EX - Double Ground/Neutral

[dcg9381]

Super helpful. I'm doing a mobile project with (2) EG4 6500EX-48's in "split phase" (240V).
My inverters were ordered 2/2023. Based on what I've learned here:

• I need to install the "mobile firmware" via https://eg4electronics.com/downloads/
• Install a M2.5 x 10mm bonding screw in ONE of the inverters.
• Main panel (inverter output) - neutral and ground are NOT bonded.

Let me know

 

[summit]

I would still check to confirm NG bonding as expected after installation, may be that's already obvious.

 

[ig1628]

Hello Folks,

Has anyone remove the neutral-ground screw from the eg4 6000 ex, and possibly have the lactation or pictures of where it is located?

Thanks

 

[FilterGuy]

Folks, I describe the grounding/bonding of the 6000 in this post:

Signature Solar's new EG4 6000 120/240V inverter

Copy/paste from my profile: 2 - EG4 6000EX-48HV 120/240V inverters (https://signaturesolar.com/eg4-6k-off-grid-inverter-6000ex-48hv) 6 - EG4 LifePower4 lithium batteries (https://signaturesolar.com/eg4-lifepower4-lithium-battery-48v-100ah) 32 - Solarever 410W Half-Cell Mono PERC solar panels...

diysolarforum.com