Bluedog225
Texas
- Joined
- Nov 18, 2019
- Messages
- 2,914
Checking in on this project. How is it going?
I was reading in the enphase literature that frequency shift should not be used alone to limit power from the microinverters. And that an overvoltage switch to a load (water heater or similar) should be used. Curious if you did this and how is it working?
I was reading in the enphase literature that frequency shift should not be used alone to limit power from the microinverters. And that an overvoltage switch to a load (water heater or similar) should be used. Curious if you did this and how is it working?